Frac Blenders

Our fleet of blenders are used for mixing or blending powders, chemicals and liquids to create the required treatment fluid on-the-fly.

Proppant concentration to 2,000 kg/m³ (17 ppg)
Up to 11 m³/min (up to 70 bpm) fluid rate
9,000 kg/min (20,000 lb/min) proppant rate through 2 x 305 mm (12 in.) augers
Nuclear density measurement (Texas Nuclear/Berthold Technologies)
Turbine and magnetic flow meters for clean and slurry flow rates
Remote control and monitoring of the additive rates/concentrations and proppant proportioning
Integrated control with Data Van and Chemical Van
Climate controlled operator cab

Proppant concentration to 2,000 kg/m³ (17 ppg)
16 m³/min (100 bpm) fluid rate
10,000 kg/min (22,000 lb/min) proppant rate through 2 x 355 mm (14 in.) augers
Nuclear density measurement (Texas Nuclear/Berthold Technologies)
Remote control and monitoring of the additive rates/concentrations and proppant proportioning
Integrated control with data van and chemical van

20 m³/min (130 bpm) slurry rate capacity
9,000 kg/min (20,000 lb/min) sand rate capacity
5 liquid additive pumps
2 dry additive feeders
Nuclear density measurement (Texas Nuclear/Berthold Technologies)
Remote control monitoring and recording of the additive rates/concentrations and sand proportioning

Deep reduction transmission for low rate pumping
Computerized data acquisition and recording
Pump rate range from 35 L/min (0.2 bpm) to 1.8 m³/min (12 bpm) (dependant on plunger size)
Maximum pressure of 41 MPa (6,000 psi) (dependant on plunger size)
2 x 2.5 m³ or 3.0 m³ displacement tanks with paddle-type fluid agitators
Rate range from 20 L/min to 2.0 m³/min
Recirculating mixing system
Electronic recording of pressure, rate, density and totals
Climate controlled operating cab