Low-Rate Fluid Pumper

Our low-rate fluid pumper is mounted on a tandem bumper pull trailer. The unit is designed to pump fluid at very low matrix rates.


  • 3 cylinder diesel engine
  • Electronic fluid rate readout
  • Pump rate range from 0 L/min to 40 L/min (0 gal/min to 10.6 gal/min)
  • Pressure rating 0 MPa to 20.7 MPa (0 psi to 3,000 psi)
  • Displacement tanks are twin 0.5 m3 (3.1 bbl) – total 1.0 m3 (6.3 bbl)
  • Portable trailer mount



Selective Reel

The selective reel is designed for selective acidizing and incorporates a high pressure hose, a hose containment reel and a squeeze manifold.

  • Length: 25 m (75 ft)
  • Diameter: 1 ½ in.
  • 103 MPa (15,000 psi) max working pressure
  • Rated for up to 28% hydrochloric acid max titrated strength





Ball Injector5_Detail_AC-BallInjectors_03.jpg

This unit electronically injects perf balls into the fluid stream during a matrix stimulation treatment to divert the fluid downhole.

  • 7/8 ball size
  • 200 ball capacity
  • Up to 103 MPa (15,000 psi) pressure rating
  • Integral 2 or 3 in  hammer  unions







Sand Jetting5_Detail_AC-SandJetting_03.jpg

Our sand jetting equipment is used to cut slots or casing to help with formation inflow.

  • Sand metering hoppers
  • Designed for both coil and well tubing
  • Replaceable cutting jets